![33' 1991 Farrier F9 R](https://boatsfsboseller.com/used-boats/Farrier/108555/Farrier-F9-R-10855501.jpg)
Type: Sail
Year: 1991
Length: 33'
Price: $30,000
State: Massachusetts
Drive: Other
Fuel: Other
Beam: 22'
Draft: 18"
![CLOSE WINDOW](https://fsboblast.com/images/closeb.png)
Type: Sail
Year: 1991
Length: 33'
Price: $30,000
City: Hudson
State: Massachusetts
Drive: Other
Fuel: Other
Beam: 22'
Draft: 18"
e-Mail Seller
Boat is located in: Hudson, Massachusetts
One partially completed Farrier F9R Trimaran Hull 340 with the following equipment building material - Foam core main hull floats from epoxy - Dagger board - 42 6 Mast - Precourt mast step, foot, ball chain plate sleaves - Precourt folding hardware kit complete with all parts per designers plans - Composites Technology carbon fiber bow sprit - Corsair aluminum rudder hardware - Stainless Steel anchor roller aluminum bow cleat - Blue Seas DC Electrical panel - Plastic 25 Gal water tank - and 38 corecell foam - Coosa foam board - Pro Set epoxy and fairing compound - Complete set of builders plans templates - Competition Composites High Aspect Lifting Rudder Cassette - Three beam molds Beam Mold, Beam Stand, Beam Top Mold - One partially completed beam - Most beam parts already made - Rack of fiberglass cloth - Flexicat fairing tool - Rinnai propane water heater - Brownell boat stands MB2 3 Quantity 1, MB0X 5 Quantity 4 The main hull and the two floats were built by a professional boat builder.
The main hull has 14.5 added to the stern and 9.5 added to the bow.
The 2 optional cabin height was also added.
The total length of the boat is 33.
It is aft cockpit design but the cockpit area is unfinished so it could be converted into an aft cabin design.
All of the beam molds are complete as are most of the beam parts.
One beam is partially complete.
Pro Set Epoxy was used thought-out the boat.
One partially completed Farrier F9R Trimaran Hull 340 with the following equipment building material - Foam core main hull floats from epoxy - Dagger board - 42 6 Mast - Precourt mast step, foot, ball chain plate sleaves - Precourt folding hardware kit complete with all parts per designers plans - Composites Technology carbon fiber bow sprit - Corsair aluminum rudder hardware - Stainless Steel anchor roller aluminum bow cleat - Blue Seas DC Electrical panel - Plastic 25 Gal water tank - and 38 corecell foam - Coosa foam board - Pro Set epoxy and fairing compound - Complete set of builders plans templates - Competition Composites High Aspect Lifting Rudder Cassette - Three beam molds Beam Mold, Beam Stand, Beam Top Mold - One partially completed beam - Most beam parts already made - Rack of fiberglass cloth - Flexicat fairing tool - Rinnai propane water heater - Brownell boat stands MB2 3 Quantity 1, MB0X 5 Quantity 4 The main hull and the two floats were built by a professional boat builder.
The main hull has 14.5 added to the stern and 9.5 added to the bow.
The 2 optional cabin height was also added.
The total length of the boat is 33.
It is aft cockpit design but the cockpit area is unfinished so it could be converted into an aft cabin design.
All of the beam molds are complete as are most of the beam parts.
One beam is partially complete.
Pro Set Epoxy was used thought-out the boat.